1kV Cold Shrinkable Five Cores Termination Kit
  • Air Pro1kV Cold Shrinkable Five Cores Termination Kit

1kV Cold Shrinkable Five Cores Termination Kit

The installation of 1kV Cold Shrinkable Five Cores Termination Kit installation procedures from one end to the other side of the construction, the construction process cannot be changed, the process is very difficult to have a bubble will appear in the cable pipe, therefore the construction quality is higher, the construction of hot shrinkage is different, heat from one end to the other side, it is easy to result in uneven heating, which leads to the generation of air bubbles, seriously affect the construction quality.

Send Inquiry

Product Description

1kV Cold Shrinkable Five Cores Termination Kit


1.Product Introduction 


All raw materials of 1kV Cold Shrinkable Five Cores Termination Kit are imported, and all silicone rubber have excellent insulation and high elasticity. After installation, it always maintains appropriate radial pressure on the cable body, so that the internal interface is tightly combined and electric breakdown will not occur due to the respiration of the cable during operation. The stress control part is integrated with the main insulation, which effectively solves the problem of electric stress concentration at the shielded section of the cable semiconductor layer. Ensure reliable insulation and safe operation. 


1kV Cold Shrinkable Five Cores Termination Kit


The scope of use of the 1kV Cold Shrinkable Five Cores Termination Kit is suitable for 0.6/1kV, XLPE, rubber insulated Five Cores power cables. In the process of use, due to the activation of temperature will produce the effect of thermal expansion and cold contraction, cold contraction construction of the cable because there is no bubble, so the cable accessories and cable thermal expansion and cold contraction will keep synchronized. The 1kV Cold Shrinkable Five Cores Termination Kit Installation acceptance test standards and operation supervision shall be carried out in accordance with relevant regulations. 


1kV Cold Shrinkable Five Cores Termination Kit factory


Our products, including 1kV Cold Shrinkable Five Cores Termination Kit, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

1kV Cold Shrinkable Five Cores Termination Kit certificate


2.Product Parameter (Specification) 


Technical Specification

Test Item

Parameters

Wet Power Frequency Withstand Voltage Test

4kV/1min

Power Frequency Withstand Voltage Test

2.4kV/4h


There are Five common technical parameters for the 1kV Cold Shrinkable Five Cores Termination Kit. As for our 1kV Cold Shrinkable Five Cores Termination Kit, the Wet Power Frequency Withstand Voltage Test is 4kV/1min. And the Power Frequency Withstand Voltage Test is 2.4kV/4h. Both parameters of our 1kV Cold Shrinkable Five Cores Termination Kit are qualified and excellent. So you can rest assured purchase, if you have specific parameter requirements, please contact our agents, we will help you as soon as we received your request.

3.Product Feature And Application 


1.Full shrinkage automatic reset technology, installation without special tools, construction and installation is simple and quick;
2.No open flame, no heating, safe and reliable;
3.The cable body has persistent radial pressure, good sealing and waterproof, to ensure long-term reliable operation.

4.Product Details 


Item

Components

Unit

Single core

Two cores

Three cores

Four cores

Five cores

Remark

1

Cold shrink breakout

pc

-

1

1

1

1

 

2

Cold shrink insulation tube

pc

1

2

3

4

5

 

3

PVC tape

roll

1

2

3

4

5

 

4

Filling mastic

bag

1

1

1

1

1

 

5

Installation instruction

pc

1

1

1

1

1



The Material list /Specific contents of the 1kV Cold Shrinkable Five Cores Termination Kit 

1kV Cold Shrinkable Five Cores Termination Kit

5.Product Qualification 


Cold shrinkage cable accessories is the use of elastomer materials (commonly used silicone rubber and ethylene propylene rubber) in the factory injection vulcanization molding, and then through expanding, lined with plastic spiral support to form a variety of cable accessories. During field installation, these preexpansion pieces are put on the treated cable ends or joints, and the plastic spiral strips (supports) of internal support are drawn out and pressed on the cable insulation to form cable accessories. Because it is at room temperature by elastic shrinkage force, rather than like heat shrinkage cable accessories to heat shrinkage with fire, so commonly known as cold shrinkage cable accessories. The product is waterproof, stress control, shielding, insulation in one, can be used in a variety of harsh environmental conditions for a long time. Widely used in Electric Power Industry, Petroleum Industry, Chemical Industry, Metallurgy, Railway, Port, Construction and other fields.


1kV Cold Shrinkable Five Cores Termination Kit produce equipment


Our products, including 1kV Cold Shrinkable Five Cores Termination Kit, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

1kV Cold Shrinkable Five Cores Termination Kit test report


6.Deliver, Shipping And Serving


1. Your inquiry will be replied within 24 hours.
2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).


1kV Cold Shrinkable Five Cores Termination Kit packing


7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: 1kV Cold Shrinkable Five Cores Termination Kit, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.