600A bus-bar acts as bus-bar in the cable branch line. It can combine T cable joint, T -II cable joint, 600A extension tube and 600A insulation cap as a cable branch lines. 600A/ 200A hybrid bus-bar gathers 200A and 600A bolt type of bus-bar interface. The 15kV Hybrid Bus-bar is made of high quality EPDM. It has the characteristics of the insulation, fully sealed. With T type cable joint, T - type cable joint or elbow cable joint connection, configuration is varied.
The 15kV Insulated Cap is is as an attachment to the charged casing accessories, to provide insulation for charged casing insulating sleeve, to provide dust-proof and moisture-proof envelope for uncharged joint. 600A insulation cap can be installed in 600A bush, bus-bar and hanging device. When the bus-bar and cable joint reserve have a spare line, must be sealed it with the 600A insulated cap.
The 15kV Bushing Extender is mated with the conversion head to form a 600A/200A conversion head with extension bush, which can be installed directly on the 600A bus-bar or 600A bushings. The 200A jack can be installed with elbow surge arrester or elbow cable connector. The 15kV Bushing Extender is made of high quality EPDM (EPDM), fully insulated and sealed.
600A/200A Integral Dead Break Bushing including The 15kV Integral Dead Break Bushing is used to convert a standard 600A dead break interface to a standard 200A load break integral.Used with a 200A insulated protective cap M.O.V Elbow Arrester. Grounding Elbow or Load Breaker Elbow Connector.A integral dead break bushing provides a fully shielded.It will be T-II connect if connects with T connect.
The 15kV Type T Cable Connector is fully insulated. Fully sealed. Used for high voltage underground cable connection equipment. Such as wind power substation, ring network cabinet and cable splicing box, the rated current is 600A, can be connected to the relevant specifications of the cable, cable type fault indicator can also be installed on the cable, can quickly and accurately find the fault point.