Bushing Holder for 12kV and 24kV Inflatable Cabinets
  • Air ProBushing Holder for 12kV and 24kV Inflatable Cabinets

Bushing Holder for 12kV and 24kV Inflatable Cabinets

The Bushing Holder for 12kV and 24kV Inflatable Cabinets provides an interface for the 630A cable connector, which is mainly used for outdoor ring network switchgear and other equipment. It is installed on the inflatable cabinet, and is connected with the 630A type cable connector, which is the 630A inlet and outlet line, and is connected with the shielded bolt type cable connector. Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.

Send Inquiry

Product Description

Bushing Holder for 12kV and 24kV Inflatable Cabinets


1.Product Introduction of the Bushing Holder for 12kV and 24kV Inflatable Cabinets


The Bushing Holder for 12kV and 24kV Inflatable Cabinets provides the interface for the 630A cable connector, mainly used for outdoor ring network switch cabinet and other equipment. It is installed on the inflatable cabinet, and is connected with the 630A type cable connector, which is the 630A near outlet, and is connected with the shielded bolt type cable connector. The suitable medium is insulating oil or SF6 gas. The induction point on the bushing can be directly grounded or connected to the live display. The material is an epoxy resin and purple copper rod, which has good mechanical and electrical properties.



HUYI in accordance with the brand of cable accessories and heat shrinkable products through constant research and development of science and technology, has reached the domestic and international most advanced level, at home and abroad enjoys a high reputation, the products sell well all over the country and world. Our Bushing Holder for 12kV and 24kV Inflatable Cabinets full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.



Our products, including Bushing Holder for 12kV and 24kV Inflatable Cabinets, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


2.Product Parameter (Specification) of the Bushing Holder for 12kV and 24kV Inflatable Cabinets


Technical Specification

Test Item

Parameters

Rated Voltage

12kV

Rated Current

630A

Power Frequency Withstand Voltage

65kV/1min

Partial Discharge

17.2kV<pc

Induction Capacitance

18±3pf


All the parameters of the Bushing Holder for 12kV and 24kV Inflatable Cabinets are in conformity with the requirements and qualified.

3.Product Feature And Application of the Bushing Holder for 12kV and 24kV Inflatable Cabinets


Executive Standard
*DIN47636.7.1990 with Power cable detachable accessory set protruding from cone, dimensions of tube and separable coupling devices Um up to 35kV;
*ANSIIEEE592-1900 Exposed semiconductor sheath for high voltage cable joints and separable insulated connectors;
*IEC60502 Extruded insulated power cables and accessories for rated voltage from 1kV (Um=1.2kV) to 30kV (Um=35kV);
*IEC61442 Test method for accessories of power cables with rated voltage from 6kV (Um=7.2kV) to 30kV (Um=35kV);
*GB12706-2002 Extruded insulated power cables and their accessories for rated voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV);
*GB311.1-1997 High voltage transmission and distribution equipment insulation coordination;
*GB/41.9-1999 Technical conditions of high pressure casing;
*GB11032-2010 Ac non - gap metal oxidation arrester;

4.Product Details of the Bushing Holder for 12kV and 24kV Inflatable Cabinets


The details of the Bushing Holder for 12kV and 24kV Inflatable Cabinets 


5.Product Qualification of the Bushing Holder for 12kV and 24kV Inflatable Cabinets


The Bushing Holder for 12kV and 24kV Inflatable Cabinets has compact structure, small footprint, easy installation, convenient operation and maintenance free. The Bushing Holder for 12kV and 24kV Inflatable Cabinets has an outdoor all-weather, fully protective structure. Suitable for high temperature, cold, flood immersion, high dust area. Fully sealed, fully insulated structure, no insulation distance, effectively ensure personal safety. The Bushing Holder for 12kV and 24kV Inflatable Cabinets can be flexibly combined to make the outlet branch number up to seven, and can be combined with the load switch to form a ring network power supply, fully meet a variety of wiring requirements. The Bushing Holder for 12kV and 24kV Inflatable Cabinets can be used as a switch with load plug. After installing fault indicator, cable fault can be detected quickly.



Our products, including Bushing Holder for 12kV and 24kV Inflatable Cabinets, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.



6.Deliver, Shipping And Serving of the Bushing Holder for 12kV and 24kV Inflatable Cabinets


1. Your inquiry will be replied within 24 hours.

2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).



7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: Bushing Holder for 12kV and 24kV Inflatable Cabinets, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.