Cold Shrinkable Termination Kit

Cold Shrinkable Termination Kit are made of elastomer materials (commonly used silicone rubber and ethylene propylene rubber) in the factory injection vulcanization molding, and then through expanding, lined with plastic spiral support to form a variety of cable accessories parts. During field installation, these preexpansion pieces are put on the treated cable ends or joints, and the plastic spiral strips (supports) of internal support are drawn out and pressed on the cable insulation to form cable accessories.  

Because Cold Shrinkable Termination Kit is at room temperature by elastic shrinkage force, rather than like heat shrinkage cable accessories to heat shrinkage with fire, so commonly known as cold shrinkage cable accessories.  In the early stage, the cold shrink cable end only uses silicon rubber cold shrink parts for additional insulation, and the stress cone type or stress band wrap type is still used for electric field treatment.  

Our Cold Shrinkable Termination Kit are full shrinkage automatic reset technology, installation without special tools, construction and installation is simple and quick; No open flame, no heating, safe and reliable; make the cable body has persistent radial pressure, good sealing and waterproof, to ensure long-term reliable operation. As the Chinese manufacturer of this Cold Shrinkable Termination Kit, HUAYI CABLE ACCESSORIES Co.,Ltd. choose safer materials, better quality and more competitive price.
View as  
 
  • The installation of 1kV Cold Shrinkable Four Cores Termination Kit is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

  • The 1kV Cold Shrinkable Three Cores Termination Kit are anti-pollution, anti-aging, good hydrophobicity, excellent cold resistance and heat resistance, especially suitable for high altitude area, cold area, wet area, salt fog area and heavy pollution area. And installation without open fire, especially suitable for petroleum, chemical, mining and other flammable and explosive places.

  • The installation of 1kV Cold Shrinkable Two Cores Termination Kit installation procedures from one end to the other side of the construction, the construction process cannot be changed, the process is very difficult to have a bubble will appear in the cable pipe, therefore the construction quality is higher, the construction of hot shrinkage is different, heat from one end to the other side, it is easy to result in uneven heating, which leads to the generation of air bubbles, seriously affect the construction quality.

  • The installation of 1kV Cold Shrinkable Single Core Termination Kit is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.

Huayi is a professional high quality Cold Shrinkable Termination Kit Manufacturers and Suppliers in China. If you want to buy cheap Cold Shrinkable Termination Kit in stock, contact us to get low price. And we also support bulk. If you need, we also provide quotation. We sincerely welcome new and old customers to visit our factory for consultation and negotiation. For more information, contact us now.