Front or Rear Connector
  • Air ProFront or Rear Connector

Front or Rear Connector

Front or Rear Connector is directly connected with the inlet and outlet bushings of the switch cabinet and the wall bushings of the cable branch box to provide fully insulated safe lines for the switch cabinet and cable branch box. The tail can be directly blocked with insulation plug, or can be extended to connect the rear connector or rear arrester.

Send Inquiry

Product Description

Front or Rear Connector


1.Product Introduction 


The Front or Rear Connector is fully shielded and fully sealed separable connections are provided when the product is fitted with an appropriate casing or plug; It can run for a long time under water and other harsh conditions; The built-in capacitance test point is used to measure the line live state, and must be used with live display; There is no minimum interphase installation distance requirement; Installation of the Front or Rear Connector can be vertical, horizontal, or any Angle. 


Front or Rear Connector


The Front or Rear Connector is used to connect switch cabinet, cable branch box, inlet and outlet bushing and other equipment. HUYI in accordance with the brand of cable accessories and heat shrinkable products through constant research and development of science and technology, has reached the domestic and international most advanced level, at home and abroad enjoys a high reputation, the products sell well all over the country and world. Our Front or Rear Connector full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


Front or Rear Connector factory


Our products, including Front or Rear Connector, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

Front or Rear Connector certificate


2.Product Parameter (Specification)


Technical Specification

Test Item

12kVParameters

24kVParameters

35kVParameters

Nominal Voltage

8.7kV

15.2kV/26.3kV

26kV/35kV

Power Frequency Withstand Voltage

42kV/1min

55kV/5min

117kV/5min

DC Withstand Voltage

53kV/15min

78kV/15min

104kV/15min

Lightning Shock Withstand Voltage

95kV

125kV

215kV

Partial Discharge Voltage <10PC

13kV

22kV

45kV


All the parameters of the Front or Rear Connector are in conformity with the requirements and qualified.

3.Product Feature And Application


Executive Standard
*DIN47636.7.1990 with Power cable detachable accessory set protruding from cone, dimensions of tube and separable coupling devices Um up to 35kV;
*ANSIIEEE592-1900 Exposed semiconductor sheath for high voltage cable joints and separable insulated connectors;
*IEC60502 Extruded insulated power cables and accessories for rated voltage from 1kV (Um=1.2kV) to 30kV (Um=35kV);
*IEC61442 Test method for accessories of power cables with rated voltage from 6kV (Um=7.2kV) to 30kV (Um=35kV);
*GB12706-2002 Extruded insulated power cables and their accessories for rated voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV);
*GB311.1-1997 High voltage transmission and distribution equipment insulation coordination;
*GB/41.9-1999 Technical conditions of high pressure casing;
*GB11032-2010 Ac non - gap metal oxidation arrester;

4.Product Details 


The details of the Front or Rear Connector 


Front or Rear Connector


5.Product Qualification


The Front or Rear Connector has compact structure, small footprint, easy installation, convenient operation and maintenance free. The Front or Rear Connector has an outdoor all-weather, fully protective structure. Suitable for high temperature, cold, flood immersion, high dust area. Fully sealed, fully insulated structure, no insulation distance, effectively ensure personal safety. The Front or Rear Connector can be flexibly combined to make the outlet branch number up to seven, and can be combined with the load switch to form a ring network power supply, fully meet a variety of wiring requirements. The Front or Rear Connector can be used as a switch with load plug. After installing fault indicator, cable fault can be detected quickly.


Front or Rear Connector equipment


Our products, including Front or Rear Connector, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.

Front or Rear Connector test report


6.Deliver, Shipping And Serving


1. Your inquiry will be replied within 24 hours.
2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).


Front or Rear Connector packing


7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: Front or Rear Connector, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.