Prefabricated Dry Cable Termination
  • Air ProPrefabricated Dry Cable Termination

Prefabricated Dry Cable Termination

Prefabricated dry cable termination is made of stress cone and silicone rubber insulation material. The stress cone was designed and optimized by finite element analysis software, made of electrically conductive silicone rubber, it make the electric field distribution at cable shield port is improved and uniform reliably.

Send Inquiry

Product Description

Prefabricated dry cable termination


1.Product Introduction of the Prefabricated dry cable termination


Prefabricated dry cable termination is made of stress cone and silicone rubber insulation material. The stress cone was designed and optimized by finite element analysis software, made of electrically conductive silicone rubber, it make the electric field distribution at cable shield port is improved and uniform reliably. It's High quality imported silicone rubber injection molding, High Strength, High Elasticity, Aging Resistance. It has good Leakage Resistance, Corrosion Resistance and Hydrophobic Performance, and with high Anti-pollution Flashover Performance, it can also maintain good electrical performance under heavy pollution conditions; Seamless manufacturing process, improve the mechanical and physical properties and electrical properties of products. 



The Prefabricated dry cable termination has been operating as our signature product for many years. HUYI in accordance with the brand of cable accessories and heat shrinkable products through constant research and development of science and technology, has reached the domestic and international most advanced level, at home and abroad enjoys a high reputation, the products sell well all over the country and world. Our company has an independent factory site with the building area of 27000 square meters, the land area of more than 14300 square meters. Product testing equipment is complete, with nano electron accelerator, injection moulding machine, rubber molding machine and other production and manufacturing equipment. Also it has high pressure screening test center, fully meet the needs of product inspection and testing.



Our products, including Prefabricated dry cable termination, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


2.Product Parameter (Specification) of the Prefabricated dry cable termination


Technical Specification

Test Item

Parameters

Power frequency withstand voltage

160kV/15min

Partial Discharge

96kV≤1.5pc

Creepage Distance

≥4100mm

Pollution Severity

ⅣLevel


These parameters of our Prefabricated dry cable termination are qualified and excellent. So you can rest assured purchase, if you have specific parameter requirements, please contact our agents, we will help you as soon as we received your request.

3.Product Feature And Application of the Prefabricated dry cable termination


1.Light weight, about 1/8~1/10 of the weight of the porcelain sleeve termination, fewer parts, easy installation;
2.Silicone rubber dry structure, no oil and gas filling, no pollution to the environment;
3.Flexible seismic, no combustion, explosion danger, operation free of maintenance;
4.Not easy to damage, easy to transport and install;
5.Flexible installation position and direction, can be installed on the pillar or overhead tower, vertical or incline installation;
6.All prefabricated stress cones are 100% factory tested as per standard in the factory.

4.Product Details of the Prefabricated dry cable termination


The Details of the Prefabricated dry cable termination 



5.Product Qualification of the Prefabricated dry cable termination


At present, the main type of cross-linked cable terminals for 110~345kV voltage grade is prefabricated rubber stress cone terminal (prefabricated terminal), and the cross-linked cable terminals for higher voltage grade are silicon oil impregnated film capacitor cone terminal (capacitor cone terminal). Other types of terminals, such as the wrap type used earlier in the 110kV voltage class, are now rarely used. The Prefabricated dry cable termination has the characteristics of high mechanical strength, good insulation performance and strong pollution resistance.



Our products, including Prefabricated dry cable termination, have passed ISO9001: 2015 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system and the national production safety standardization certification, full implementation "6S" production management system, realize products zero defect, dedicated to provide customers with stable quality, reliable performance and high added value high quality products.


6.Deliver, Shipping And Serving of the Prefabricated dry cable termination


1. Your inquiry will be replied within 24 hours.
2. We offer you professional service in fluent English.
3. Keep the mass production as the sample in high quality
4. Freight forwarder: faster, safer, and convenient.
5. Quality: we have QC on each process,provide high quality products.
Any problem or needed please feel free let us know, we are glad to service for you
We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry. If you can not buy our product in your local area, we will ship a sample to you (Please contact our agent or send email to our mailbox).



7.FAQ

Q1: Are you a factory or trading company?
A1: We are a factory, we can provide competitive price.

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3: Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: If you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.

Q5: Why choose us?
A5: Welcome to our company, we are a group of creative people.
1.High quality is our obligation
2.Customer first, contact us now!
3.Great service is our mission!
4.Quality is the essence, wealth is the fruit.
5.Your opinion is the driving force of our progress.
6.A smile on your face and a service in your heart.

Hot Tags: Prefabricated Dry Cable Termination, China, Cheap, Quality, Bulk, Manufacturers, Suppliers, Factory, Quotation, In Stock

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.