The Bus Wire Harness Connector DJ7051z-1.5-21 is used for the top expansion connection of SF6 insulated metal switchgear, realizing full sealing and full insulation connection between the load switch and bus,completely avoiding the fatal defect brought by high voltage exposure in bad weather,and it is easy to install and high reliability.The length of the bus can be customized according to customer requirements,and the end of the bus is fixed with terminals and bushing. Suitable for electrical system with rated current up to 1250A.
The Polyethylene Foam Insulation Tube is a special heat shrinkable casing made of polyolefin material. The outer layer is made of high quality soft crosslinked polyolefin material and the inner layer of hot melt adhesive. The outer layer has the characteristics of insulation, corrosion resistance and wear resistance, and the inner layer has the advantages of low melting point, waterproof sealing and high adhesion.
GYFXTY G652D PBT Loose Tube Armored Fiber Optic Cable with HDPE Jacket is a Heat Shrinkable sleeve for insulation protection commonly used on cables. The main material of this product is PE. After irradiation cross-linking and heating expansion, it has heat-shrinkable function with a shrinkage ratio of about 3:1 and a diameter ranging from 50-350mm. It can be used as heat shrinkable inner sheath, outer sheath and outer insulation and waterproof sheath in cable accessories.
The Teflon High Shielding Clip Wire Antenna Coaxial Pigtail Braid Cable is used to isolate electromagnetic field noise sources from sensitive devices and cut off the propagation path of the noise sources. Teflon High Shielding Clip Wire Antenna Coaxial Pigtail Braid Cable is divided into active shielding and passive shielding. Active shielding is to prevent noise sources from radiating outward. Passive shielding is designed to prevent sensitive equipment from being interfered by noise sources.
Electric Motor Cable Termination Box is a important part of 110kV products. The main varieties of 110kV and above XLPE insulated cable termination are: Outdoor termination, GIS termination (installed in fully enclosed combined appliances) and transformer termination (installed in transformer oil tanks). Prefabricated Rubber Stress Cone Termination and Prefabricated Intermediate Joint are main type of high voltage crosslinked cable accessories used in China. Our 110kV series products meet the requirements of IEC60840 and GB/T11017.3, the product adopts special electric field analysis software to optimize the design, and they are made of high quality materials and advanced production technology, it ensures uniform electric field, stable performance and reliable operation.
The High Quality Heat Shrinkable Busbar Insulating Tube comprises a heat-shrinkable semi-conductive layer and an insulating layer snaggle together, the insulating layer is located on the inner side, the heat-shrinkable semi-conductive layer is located on the outer side of the insulating layer, the insulating layer is made of elastic material and can rely on its own elastic shrinkage.