Product

  • The material composition of 9220 Self Fusing Electrical Stress Control Insulation Tape is made up of a variety of polymer materials blending or copolymerization, the general base material is polar polymer, and then add high dielectric constant filler and so on. The Heat Shrinkable 9220 Self Fusing Electrical Stress Control Insulation Tape in cable accessories is mainly used to relieve the electrical stress at the outer shielding cut of the shielding end of dispersed cross-linked power cable.

  • Our 10kv 3 Core Heat Shrinkable Cable Termination Kit for Power Cables is an important part of the range of Heat Shrinkable Products series, the 10kv 3 Core Heat Shrinkable Cable Termination Kit for Power Cables generally to polyethylene, ethylene-vinyl acetate (EVA) and Ethylene-Propylene Rubber and other material components of the blend. Our 10kv 3 Core Heat Shrinkable Cable Termination Kit for Power Cables is widely used in electric power, electronics, petroleum, chemical, construction, communication and other electrical fields.

  • 15kv 630A / 20kv 630A IEC Type Rear Connector ( HJT -15/630-150) is applied to ring network cabinet, cable branch box of the main network system or box transformer ring network system, as the incoming and outgoing cable connection. It can be connected to 630A busbar wire, and can also be connected to multiple groups by connect touch-able rear connector to form multiple loops. The 15kv 630A / 20kv 630A IEC Type Rear Connector ( HJT -15/630-150) rated current 630A, suitable for XLPE power cable with 25-500mm2 cross section.

  • The 15kv/24kv 630A Insulated Protective Cap is is as an attachment to the charged casing accessories, to provide insulation for charged casing insulating sleeve, to provide dust-proof and moisture-proof envelope for uncharged joint. 600A insulation cap can be installed in 600A bush, bus-bar and hanging device. When the bus-bar and cable joint reserve have a spare line, must be sealed it with the 600A insulated cap.

  • The installation of 1kv L. V 5-Core Heat Shrinkable Termination Kit (Section 25~50 mm^2) installation procedures from one end to the other side of the construction, the construction process cannot be changed, the process is very difficult to have a bubble will appear in the cable pipe, therefore the construction quality is higher, the construction of hot shrinkage is different, heat from one end to the other side, it is easy to result in uneven heating, which leads to the generation of air bubbles, seriously affect the construction quality.

  • The 1 Kv 4 Cores Radiation Cross-Linked Heat Shrinkable Joint not only has excellent electrical performance and good mechanical properties, but also has the advantages of light weight, easy installation, aging resistance, adapt to the use of high temperature and cold conditions. It's widely used in electric power, electronics, petroleum, chemical, construction, communication and other electrical fields

 ...23456...19