The Butt Bushing mainly used for cable branch box, ring network switch cabinet, connected with front plug, can be connected with live indicator, display bus live state. The body of the product is made of high quality epoxy resin and has good mechanical and electrical properties. Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.
The 12kV integrated bushing provides interface for 630A European-style joint products, which is mainly used for SF6 load switch branch box to connect with European-style front and rear joint and other products. The body of the product is made of high quality epoxy resin. Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.
The Front or Rear Surge Arrester can be directly connected to the casing seat, through the wall casing, etc.,to provide reliable over voltage protection for the power system. It can provide reliable over voltage protection for the power system. The shielded rear arrester's outer semi-conductive layer ensures the safety of installation and maintenance personnel and the safe operation of the equipment, at the same time, it's UV resistance, resistance to wire aging, waterproof, moisture-proof performance to ensure that the product can operate safely and reliably in harsh environment.
As one of the leading industries in the power cable accessories, Our 12kV Special-shaped Bus-bar is widely used in cable branch box with SF6 load switch or vacuum circuit breaker. The structure of the 12kV Special-shaped Bus-bar is flexible and changeable to meet a variety of wiring modes; Full insulation, full sealing, high safety performance Our independent plant covers an area of more than 14,000 square meters of production and testing equipment are complete.
12kV π Type Touchable Front or Rear Connector is applied to ring network cabinet, cable branch box of the main network system or box transformer ring network system, as the incoming and outgoing cable connection. It can be connected to 630A busbar wire, and can also be connected to multiple groups by connect touch-able rear connector to form multiple loops. The 12kV π Type Touchable Front or Rear Connector rated current 630A, suitable for XLPE power cable with 25-500mm2 cross section.
The installation of 15kV Connector Special Cold Shrinkable Cable Accessories is cold shrinkage construction, in the process of construction as long as the plastic wire core of the cable can automatically complete the contraction, without heating, this process is simple and practical, relative to the installation of heat shrinkage cable to eliminate the phenomenon of uneven shrinkage of insulation tube. When the heat shrinkable cable accessories are installed, the cable needs to be heated, which is easy to lead to uneven heating or no contraction at all, thus affecting the construction quality.