View as  
  • DTL Bimetallic Terminal Cable Lug and Terminals are used to connect tap conductor to power equipment (transformer, circuit breaker, disconnect switch. etc) or to wall bushing of substation.Aluminum connectors are also used to connect the tap conductor of T-connector.

  • Aluminum alloy bolt type shear type cable lug and terminals it doesn’t need hydraulic tool but a spanner to finish installation. The special eccentric design for round conductor ensures enough anti-wrench strength and conductivity. The bolts and nuts are specially designed to install on large range of conductor. The barrel capped is filled with joint compound to avoid oxidization.

  • 12kV European Cable Branch Box is special electrical equipment in distribution system for collecting and taping. 12kV European Cable Branch Box the main spare parts consists of the box body,insulation sleeve, shielding separable connector, charged display.The cable can finish the electrical connection through the separable connector and insulation sleeve and realize collected and tapping function.

  • JX Earth Protection Box and JBX Earth Protection Box are suitable for direct grounding or protection grounding of metal protective layer of single core cross-linked cable of high voltage (35kV, 66kV, 110kV, 220kV) grade. The JX Earth Protection Box is used for the direct grounding of the metal cover of the three-phase single-core cable. The JBX Earth Protection Box is used for the protection grounding of the metal cover of the three-phase single-core cable.

  • The main body of the Prefabricated Cable Joint is made of imported EPDM rubber injection molding. After installation, it is protected by high strength copper shell. Inside the shell, high-performance waterproof insulation sealant is poured into one body. The outer layer can be equipped with glass fiber reinforced plastic protection box as required. The inside of the box is poured with waterproof insulation sealant to ensure the safe operation of the joint in the harsh environment such as water accumulation and high corrosion for a long time.

  • GIS Cable Termination adopts the combined structure of stress cone and epoxy tubing, and the prefabricated stress cone surface is close to the inner wall of the epoxy tubing through spring assembly, so as to achieve reasonable interface pressure.