250A Elbow Connector

The 10kV and 24kV Elbow Type Cable Connector is the most popular product in 250A Elbow Connector series, which is used for connecting cable and transformer, switch gear, cable connection box, etc. It is suitable for indoor and outdoor installation.Products meet the GB/T 12706.4-2002  IEC60502.4-2005.

The 250A Elbow Connector provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.It can run under water and other harsh conditions for a long time, and built-in capacity test point to determine the circuit status or install a fault indicator. No minimum phase clearance requirements. Mounting can be vertical,horizontal,or any angle in between.

The 250A Elbow Connector series including 10kV and 24kV Elbow Type Cable Connector, 10kV and 24kV Straight-through Cable Connector, 24kV Bushing Holder and 24kV Extended Bushing Holder.

View as  
 
  • 24kV Extended Bushing Holder or 24kV 250A bushing holder provides the interface for the 250A cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicon) apparatus, including switch gear, transformer and capacitors. The bushing holder is molded using high quality epoxy rubber, which meet the requirement of standard EN50180/EN50181 DIN47636/HN52-S-61.

  • The 24kV Bushing Holder provides the interface for the 250A cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicon) apparatus, including switch gear, transformer and capacitors. The Apparatus Bushing is molded using high quality epoxy rubber, which meet the requirement of standard EN50180/EN50181 DIN47636/HN52-S-61.

  • 10kV and 24kV Straight-through Cable Connector threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing insert and elbow connectors comprise the essential components of all load break connections. It is mainly used as the high-voltage electrical connection for American box, outdoor ring network cabinet. Bushing insert is used with bushing holder that makes it possible to on-site installation and replacement.

  • 10kV and 24kV Elbow Type Cable Connector is used to provide power for electric operation mechanism ,or fully insulation,fully shield ,fully sealing for the high voltage side of the mutual inductor JDZ12A-10R. It is suitable for 15kV 35~50mm2 XLPE. The 10kV and 24kV Elbow Type Cable Connector test point can install live display to check the live status of the equipment and meet the requirements of the nuclear phase of the line. It can be operated with live, but cannot cut off short circuit current. It’s suitable for XLPE cable with sectional area 35mm2~150mm2.

 1 
Huayi is a professional high quality 250A Elbow Connector Manufacturers and Suppliers in China. If you want to buy cheap 250A Elbow Connector in stock, contact us to get low price. And we also support bulk. If you need, we also provide quotation. We sincerely welcome new and old customers to visit our factory for consultation and negotiation. For more information, contact us now.